|
WATER VENDING CONTROLLER & Slave Unit
Requires No Coin Mechanism - Dispenses 1, 3 & 5 Gallons
ESDI Model 050300
|
All of our products come with a Two-year Warranty.
Your satisfaction is guaranteed.
|
The Model 050300 Water Vending Controller & Slave Unit is an electronic circuit board assembly that performs all of the functions necessary to accurately vend three preset quantities of water. It comes factory set to 1,3, & 5 gallons. This controller interfaces with the Model 050200A MultiPrice Controller to provide multiple vend stations, or it can be used without any coin/bill acceptor, such as in a supervised water store. Each Model 050300 Controller will allow the Model 050200A Controller to expand up to a maximum of four vend stations
|
Features:
|
- Precise metering of 1,3, and 5 gallons using a flow sensor, or internal timer.
- Interfaces with ESDI Model 050200A MultiPrice Water Vending Machine Controller.
- Selectable UV flush cycle to remove accumulated hot water from UV assembly
- Maximum Run timer stops vending if maximum vend time is exceeded. (Requires reset)
- Low water monitor, goes "Sold Out" until water is present.
- UV lamp shut down and lockout input.
- Optional RS232 communications port for SCADA.
- Board Power: 24 VAC, 600 ma, 50/60 Hz.
- Separate Pump Power: 120/240 VAC, 5 A, 50/60 Hz
|
|
|
|
|
|
|
|
|
