|
 |
WATER VENDING MACHINE CONTROLLER - MultiPrice
Incorporates NAMA® Multi-Drop Bus (MDB) Protocol
ESDI Model 050200A
|
 |
|
|
|
The ESDI Model 050200A MultiPrice Water Vending Machine Controller is an electronic circuit board assembly that performs all of the functions necessary to control and operate a Three Product, Three Price, unsupervised bulk water vending machine. This controller interfaces with most coin acceptors, bill validators, card readers, and other payment devices utilizing the NAMA® Multi-Drop Bus (MDB) protocol. It also incorporates features and options that make it cost effective and easy to use.
|
Features:
|
- Precise metering of 1,3, & 5 gallons using a flow sensor, or internal timer.
- Interfaces with most payment devices utilizing the NAMA® Multi-Drop Bus (MDB) protocol.
- Expandable to control 1, 2, 3, or 4 vend stations, from one MDB payment device.
- Selectable UV flush cycle to remove accumulated hot water from UV assembly.
- Maximum Run timer stops vending if maximum vend time is exceeded. (Requires reset)
- Low water monitor, goes "Sold Out" until water is present.
- UV lamp shut down and lockout input. (Reset required)
- Optional RS232 serial communications port for SCADA monitoring.
- Board Power: 24 VAC, 50/60 Hz, 2.5 Amps.
- Vend Rely: 240 VAC Max, 5 Amp Max
- Board Size 7.5" X 6.25"
- Enclosure Size: 11.5" X 7.75" X 6", NEMA 4
|
|
|
All of our products come with a Two-year Warranty.
Your satisfaction is guaranteed
|
|
|
|
|
|
